|
Proceedings of IGTC'03 Tokyo
|
|
CONTENTS
KEYNOTE SPEECHES
KS-1 Micro- or Small- Gas Turbines
Terry Simon (University of Minnesota, USA)
KS-2 High Temperature Materials for Gas Turbines: The Present and Future
Hiroshi Harada (National Institute of Materials Science)
KS-3 Development of High Efficiency Fuel Cell Power Plant Combined with Gas
Turbine
Takao Watanabe (Central Research Institute of Electric Power Industry)
KS-4 Future View of Energy Supply and Role of Gas Turbine in Japan
Hiroyuki Ino (Tokyo Electric Power Company)
KS-5 The Challenges of Lean Premixed Combustion
Ann Dowling (University of Cambridge, United Kingdom)
KS-6 Recent Findings of Analytical Studies in Unsteady Aerodynamics,
Aeroacoustics and Aeroelasticity of Turbomachines
Masanobu Namba (Sojo University)
KS-7 GEAE Propulsion Vision for the 21st Century Oral Presentations
Mike Benzakein (GE Aircraft Engines, USA)
ORGANIZED SESSIONS
Organized Session 1 Ultra Micro Gas Turbine 1
OS-101 Aerothermal Optimization of Micro-gasturbine Compressor Including Heat
Transfer
R. A. Van den Braembussche (von Karman Institute for Fluid
Dynamics, Belgium), A. A. I  lek,
Z. Alsalihi OS-102 Conceptual Design of Recuperator for Ultramicro Gas Turbine
T. Nagasaki (Tokyo Institute of Technology), R. Tokue, S. Kashima,
Y. Ito
OS-103 Towards the Development of Finger-Top Gas Turbines
E. Matsuo (The University of Tokyo), H. Yoshiki, T. Nagashima,
C. Kato
Organized Session 2 Ultra Micro Gas Turbine 2
OS-104 Numerical Analysis of 2.5 Dimensional Geometry Turbine Performance
N. Watanabe (The University of Tokyo), S. Teramoto, T. Nagashima
OS-105 Some Aerodynamic Performances of Small Size Compressor and Turbine
Stages
I.V. Gaydamaka (Central Institute of Aviation Motors, Russia),
A.V. Efimov, M.Ja. Ivanov, O.I. Ivanov, R.Z. Nigmatullin, N.I. Ogarko
OS-106 Structural Analysis of Rotating Parts of an Ultra-micro Gas Turbine
M. Ishihama (Kanagawa Institute of Technology), Y. Sakai,
K. Matsuzuki , T. Hikone
OS-107 Prototyping of Small-sized Two-dimensional Radial Turbines
K. Matsuura (The University of Tokyo), C. Kato, H. Yoshiki, E. Matsuo,
H. Ikeda, K. Nishimura, R. Sapkota
Organized Session 3 Ultra Micro Gas Turbine 3
OS-108 Concepts and Combustion Characteristics of an Ultra-micro and a Micro
Combustor
S. Yuasa (Tokyo Metropolitan Institute of Technology), K. Oshimi,
M. Uehara
OS-109 Internal Heat Mixing and External Heat Losses in an Ultra Micro Turbine
Y. Ribaud (ONERA, France)
OS-110 Performance of a Micro-scale Radial-Flow Compressor Impeller Made of
Silicon Nitride
J. P. Johnston (Stanford University, USA), S. Kang, T. Arima,
M. Matsunaga, H. Tsuru, F. B. Prinz
Organized Session 4 Marine Gas Turbines & Turbocharger
OS-201 Turbocharger Technology for Personal Water Craft
Y. Matsuyama (Ishikawajimaharima Heavy Industries CO., LTD.),
H. Furukawa, T. Mineta, T. Fukuda
OS-202 Research and Development of Gas Turbine for Next-Generation Marine
Propulsion System (Super Marine Gas Turbine)
M. Arai (Technological Research Association of Super Marine Gas
Turbine), T. Sugimoto, K. Imai ,H. Miyaji, K. Nakanishi, Y. Hamachi
OS-203 The WR-21 Intercooled Recuperated Gas Turbine Engine- Integration Into
Future Warships
C. R. English (Royal Navy, United Kingdom)
OS-204 Rolls-Royce MT30 Design, Certification, Launch and Growth
S. Wilmshurst (Rolls-Royce plc, United Kingdom)
TECHNICAL SESSIONS
Session A-1 Superalloy 1
TS-120 Recovery of Material Properties in Service-Degraded Gas Turbine Blades
A. Ito (Chubu Electric Power Co., Inc.), Y. Kagiya, H. Watanabe,
H. Takagi, D. Saito, Y. Yoshioka, H. Ito, J. Ishii
TS-123 Development and Evaluation of High Strength Ni-base Single Crystal
Superalloy,TMS-82+
T. Hino (Toshiba Corporation), Y. Yoshioka, Y. Koizumi, T. Kobayashi,
H. Harada
TS-124 Development of A Grain Defects Resistant Ni-Based Single Crystal
Superalloy YH61
H. Tamaki (Hitachi, Ltd.), A. Okayama, A. Yoshinari , K. Kageyama ,
K. Sato, T. Ohno
Session A-2 Superalloy 2
TS-121 Development of the Third Generation Single Crystal Superalloy for Power
Generation Gas Turbines
A. Yoshinari (Hitachi Ltd.), R. Hashizume, Y. Murata, M. Morinaga
TS-118 Mechanical Properties and Castability of a 4th Generation Ni-base Single
Crystal Superalloy TMS-138
Y. Aoki (Ishikawajima-Harima Heavy Industries Co., Ltd.), M. Arai,
K. Chikugo, Y. Koizumi, H. Harada
TS-119 Development of a Next Generation Ni-base Single Crystal Superalloy
Y. Koizumi (National Institute for Materials Science (NIMS)),
T.Kobayashi, Z. Jianxin, T.Yokokawa, H.Harada, Y.Aoki, M.Arai
TS-122 Development of a Gas Turbine Design Program Coupled with an Alloy
Design Program - A Virtual Turbine
H. Saeki (Toshiba Corporation), T. Yokokawa, H. Harada, Y. Fukuyama,
T. Yoshida
Session A-3 Thermal Barrier Coating
TS-129 Recent Developments in the Field of Plasma-Sprayed Thermal Barrier
Coatings
R. Vaßen (Institut für Werkstoffe und Verfahren der Energietechnik
(IWV 1), Germany), J. -E. Döring, M. Dietrich, H. Lehmann, D. Stöver
TS-130 Development and Evaluation of Thermal Barrier Coatings for the
1700℃-class Closed-Cycle Gas Turbine Corresponding to CO2 Collection
M. Okada (Central Research Institute of Electric Power Industry),
M. Nakayama, T. Torigoe, T. Kameda, H. Arikawa, T. Hisamatsu
TS-131 Thermal Conductivity and Sintering Behavior of Hafnia-based Thermal
Barrier Coating Using EB-PVD
K. Matsumoto (Toshiba Corporation), Y. Itoh, Y. Ishiwata
Session A-8 Force/Vibration
TS-053 Study on Blade Forced Vibration Response of Radial Inflow Turbine
K. Nakano (Ishikawajima-Harima Heavy Industries Co. Ltd), H. Hattori,
Y. Hirata
TS-054 Euler/N-S Analysis of Linear Unsteady Aerodynamic Forces on Vibrating
Annular Cascade
T. Nagasaki (Kyushu University), N. Yamasaki
TS-055 Numerical Analysis of Active Cascade Flutter Control with Smart
Structure
J. Kazawa (The University of Tokyo), T. Watanabe
Session B-1 Unsteady Flow & Noise 1
TS-047 Study on Noise Reduction in Turbofan (Effects on Performance and Noise
by Improving Outlet Angle of Impeller)
T. Hirano (Hosei University), G. Minorikawa, S. Suzuki, S. Mizuki
TS-048 Unsteady Three-Dimensional Navier-Stokes Simulations of Turbine
Rotor-Stator Interaction Using Multi-Airfoil
D. Biswas (Toshiba Corporation), T. Takamatsu, H. Iwasaki
TS-049 Numerical and Experimental Investigation of the Unsteady Flow Field in a
Transonic Centrifugal Compressor
H. Krain (DLR, Germany), C. Hah
Session B-2 Turbine Flow Simulation
TS-070 Turbulent Flow Computation in Film-Cooling Turbine Cascades
B. Kurmanov (ALSTOM Power Uniturbo, Russia), M. Namba,
G. Podvidz
TS-071 A New Approach to Improve Film Cooling Effectiveness Using Combined
Jets
A.Javadi (Aerospace Research Institute, Iran), K.Javadi,
M. Taeibi-Rahni , M. Darbandi
TS-072 A Three-Dimensional Navier-Stokes Simulation of A Film-Cooled Turbine
Stage
T. Nishizawa (Japan Aerospace Exploration Agency), K. Saiki,
O. Nozaki, K. Kikuchi
TS-073 Numerical Investigation of the Flow Field in HP Turbine Stage
F. Martelli (University of Florence, Italy), P. Adami, E. Belardini
Session B-3 Internal Flows 1
TS-031 The Simulation of 3D Flows in Blade Rows and Exhaust Systems using a
Multiblock Navier-Strokes Solver
J. Liu (Chinese Academy of Sciences, P.R.China)
TS-032 3D Configuration of Shock Wave in Transonic Centrifugal Impeller Using
2D-PIV
M. Hojo (Japan Aerospace Exploration Agency), H. Hayami, S. Aramaki
TS-033 Numerical Study on Blade Roughness Effect on the Performance of
Turbomachines
S. H. Kang (Seoul National University, Korea), Y. S. Kang, K. H. Han
Session B-4 Internal Flows 2
TS-027 Numerical Simulation of Stall Suppression by Micro Air Injection in a
Low-Speed Axial Compressor
G. Xu (Chinese Academy of Sciences, P.R.China), H. Zhang, C. Nie,
W. Huang, J. Chen
TS-028 Numerical Investigation of two 3-D Designed Profiles in a 2-stage Turbine
with Shrouded Bladings
D. E. Bohn (Aachen University, Germary), I. Balkowski, C. Tümmers,
M. Sell
TS-029 Aerodynamic Blade Optimal Design of Turbomachinery
R. S. Amano (University of Wisconsin-Milwaukee, USA), C. Xu
TS-030 Numerical Analysis of Tip Leakage Flow Field in a Transonic Axial
Compressor Rotor
K. Yamada (Iwate University), M. Furukawa, M. Inoue, K. Funazaki
Session B-5 Internal Flows 3
TS-114 Development of a New High-Speed Multi-Stage Compressor Facility ;
Experimental Set Up
D. Lippett (Cranfield University, United Kingdom), P. Timmis, P. Ivey,
D. Bailey, G. Woollatt
TS-023 Experimental Investigation on Shock Wave and Turbulent Boundary Layer
Interactions in a Square Duct at Mach 2 and 4
H. Sugiyama (Muroran Institute of Technology), K. Fukuda,
K. Mizobata, L. Sun, R. Minato
TS-024 Computation of the Flow in a H.P.Compressor Drive Cone Cavity
K. M. Tham (University of Sussex, United Kingdom), C. A. Long,
A. B. Turner, J. A. Dixon
TS-025 Experimental and Numerical Investigation of Sealing Performance of
Turbine Rim Seals
K. Teramachi (Ishikawajima-Harima Heavy Industries Co., Ltd.),
M. Hamabe, T. Manabe, N. Yanagidani
TS-026 CFD Studies of Industrial Gas Turbine Exhaust Diffusers
K. Ishizaka (Mitsubishi Heavy Industries Ltd.), S. Wakazono , M. Yuri ,
R. Takahashi
Session B-6 Development & Verification of CFD Codes
TS-020 The Experience of CFD Calculations for Flow Analysis in Centrifugal
Compressor Stages
Y. B. Galerkin (TU Saint-Petersburg, Russia), V. P. Mitrofanov,
A. Y. Prokofiev
TS-021 Numerical Prediction of Humid Effect to Transonic Flows in
Turbomachinery
Y. Sasao (Tohoku University), S. Yamamoto
TS-022 High Accuracy Multigrid Method of the Unsteady Convection Diffusion
Equation and Calculations of Heat and Fluid Flow
W. Wu (The University of Shanghai for Science and Technology,
P.R.China) , Y. Ge
Session B-7 Surge/Stall 1
TS-037 A Stability Model for Transonic Axial Compressors
W. Yu (Beijing University of Aeronautics and Astronautics, P.R.China),
X. Sun
TS-038 Prediction and Active Control of Surge Inception of a Centrifugal
Compressor
N. Hagino (Kanagawa Institute of Technology), K. Uda, Y. Kashiwabara
TS-039 The Measurements of Unsteady Flow Fields in an Axial Flow Fan under
Stalled Condition
K. H. Kim (Korea Institute of Science and Technology, Korea) ,
Y. H. Shin, C. S. Kang
TS-040 Development of a Surge Prediction System for Multi Stage Axial
Compressors
H. Hoenen (RWTH Aachen University, Germany), T. Arnold
Session B-8 Surge/Stall 2
TS-044 Early Pre-stall Investigation by Sensitive Stall Warning Technique
N. Tahara (Ishikawajima-Harima Heavy Industries Co.,Ltd.),
M. Kurosaki , Y. Ohta , E. Outa , H. Shinohara
TS-045 Experimental Investigation of Rotating Stall Inception in Axial Flow Fans
S.K.Sane (Indian Institute of Technology Bombay, India), D. Sekhar,
N. V. Patil, P. Tagade
TS-046 Unsteady Phenomena during Transient Process in Radial Vanelss Diffuser
N. Hayashi (Chiba Institute of Technology), T. Tagawa, M. Koyama,
I. Ariga, M. Sano
Session C-1 Aero Engine 1
TS-107 MG5 series Commercial Helicopter Engine Development and Utilization
S. Uchida (Mitsubishi Heavy Industries, Ltd.), Y. Nagashima,
K. Shimauchi
TS-104 Overview on 4 Years Achievements of Research and Technology
Development of Environmentally Compatible Propulsion System for Next-
Generation Supersonic Transport (ESPR project)
Y. Fujitsuna (Engineering Research Association for Supersonic
Transport Propulsion System)
TS-105 Technology Requirements for Revolutionary Propulsion Systems of the
21st Century
W. Whitlow, Jr. (NASA Glenn Research Center, USA), J. M. Earls ,
V. W. Wessel
Session C-2 Aero Engine 2
TS-106 Revolutionary Propulsion Systems for 21st Century Aviation
A. K. Sehra (NASA Glenn Research Center, USA), J. Shin
TS-108 Design and Test of Transonic Compressor Rotor with Tandem Cascade
Y. Sakai (Kawasaki Heavy Industries, LTD), A. Matsuoka, S. Suga,
K. Hashimoto
TS-109 A Booster Stage with Tandem Cascade Rotor for Fan Engine
S. Suga (Kawasaki Heavy Industries, Ltd.), A. Matsuoka , Y. Sakai,
K. Hashimoto
Session C-3 Heat Transfer & Flow Transition
TS-066 Construction of Cooling Effectiveness Database Applied to the Virtual Gas
Turbine in HTM21 Project
M. Matsushita (Japan Aerospace Exploration Agency), T. Yoshida
TS-068 Effects of Periodic Wake Passing Upon Bypass Transition of Blade
Boundary Layer and Unsteady Loss
E. Koyabu (Sophia University) , K. Funazaki, M. Kimura
TS-069 Studies on Effects of Periodic Wake Passing upon a Blade Leading Edge
Separation Bubble: Transitional Behaviors of Separated Boundary Layer
K. Funazaki (Iwate University), K. Yamada, Y. Kato
Session C-4 Turbulence Model
TS-059 The SST Turbulence Model with Improved Wall Treatment for Heat
Transfer Predictions in Gas Turbines
F. Menter (ANSYS CFX, Germany), J. Carregal Ferreira, T. Esch,
B. Konno
TS-060 Large-Eddy Simulation of Film Cooling
X. Guo (Aachen University, Germany), W. Schröder, M. Meinke
TS-061 Second-moment Turbulence Closure in Prediction of Channel Flow with
System Rotation
M. Ichikawa (Keio University), S. Obi, S. Masuda
TS-062 Large-Eddy Simulation of Trailing-Edge Blowing
J. Krömer (Rheinisch-Westfälische Hochschule Aachen ,Germany),
M. Meinke, W. Schröder
Session C-5 Ribbed Passage Flow & Heat Transfer
TS-078 Rib-Induced Secondary Flow Structures inside a High Aspect Ratio
Trapezoidal Channel - Application to Cooling of Gas Turbine Blade Trailing
Edge -
R. Kiml (Tokyo University of A&T), S. Mochizuki, A. Murata, M. Sulitka
TS-079 PIV Flow Field Measurements in a Rotating U-Shaped Channel.
Comparison of smooth and 90°rib-roughened walls.
Y. Servouze (Office National d‘Etudes et de Recherches
Aérospatiales, France), C. Brossard, P. Gicquel
TS-080 Heat Transfer Characteristic of a Triangular Channel with Turbulence
Promoter
K. Takeishi (Mitsubishi Heavy Industries Ltd.), T. Kitamura,
M. Matsuura, K. Shimizu
TS-081 Effects of Rotation Speed on Heat Transfer in a 90°-Rib Roughened
Two-Pass Duct
Y. Y. Kim (Yonsei University, Korea), K. M. Kim, D. H. Rhee, H. H. Cho
TS-082 The Effects of Oblique Discrete Rib Arrangement on Heat Transfer
Performance of a Square Duct
K. Tatsumi (Kyoto University), H. Iwai, K. Suzuki
Session C-6 Unsteady Flow & Noise 2
TS-056 An Experimental Study on Unsteady Flow Behaviors in an Axial-Flow
Turbine
S. Kasuga (Tokyo Denki University), A. Yamamoto, T. Miyachi,
T. Okaniwa
TS-057 Wake Decay within the Stator Vane in a High-Speed Axial-Flow
Compressor
R. Nohara (Ishikawajima-Harima Heavy Industries Co.,Ltd.), K. Imanari,
I. Fujii, Y. Ooba
TS-058 Effects of Airfoil Clocking on Aero-performance and Unsteady Blade
Loading in a High-Speed Axial Compressor
D. Kato (Ishikawajima-Harima Heavy Industries Co., Ltd.), K. Imanari
Session C-7 Industrial Gas Turbine & Power Plant 1
TS-098 High-efficiency Gas Turbines Operating in Intermediate Duty
B. Becker (SIEMENS POWER GENERATION, Germany), V. Thien
TS-099 Modernization and Upgrade Programs for Mitsubishi Heavy-duty Gas
Turbines
K. Watanabe (Mitsubishi Heavy Industries, Ltd.), H. Arimura, K. Akagi,
H. Sakuma
TS-100 Development and In-house Shop Load Test Results of M701G2 Gas
Turbine
A. Maekawa (Mitsubishi Heavy Industries, LTD.), R. Magoshi, Y. Iwasaki
Session C-8 Industrial Gas Turbine & Power Plant 2
TS-101 Repowering of Lowshan Power Plant
M. R. Shahnazari (Niroo Research Institute, Iran), D. Foroughi,
H. Fakharian
TS-102 Gas Turbine Based Power Plants:Repowering Reduces Emissions and
Increase Efficiency of Existing Plants while Re-utilising Available Assets
H. -R. Schenk (ALSTOM, Switzerland), G. Ehren, Yu TatMing
TS-103 Design for F Class Blast Furnace Gas Firing 300 MW Gas Turbine
Combined Cycle Plant
T. Komori (Mitsubishi Heavy Industries, Ltd.), H. Hara, H. Arimura,
Y. Kitauchi
Session D-1 Cascade Design
TS-041 Novel Blade-free Turbomachine Concept for Microgasturbine Engine
Applications (Part 1. Design.Design Characteristics. Metal Model
Realization)
A. Soudarev (Boyko Research-Engineering “Ceramic Heat Engines”
Center (NIZ KTD), Russia), A. Souryaninov, V. Tikhoplav,
A. Molchanov, P. Avran, L. Lelait
TS-042 Development Status of a Fore-Loaded Turbine Blade
H. Taki (Kawasaki Heavy Industries, Ltd.), D. Kataoka, H. Kato,
K. Hashimoto
TS-043 CFD Design of a 8:1 Pressure Ratio Centrifugal Compressor
V. I. Mileshin (Central Institute of Aviation Motors, Russia),
A. N. Startsev, I. K. Orekhov
Session D-2 Combustion Control
TS-146 Application of the Helmholtz Resonator for Reducing the Combustion
Oscillation in a Gas Turbine
S. Yamanaka (Toshiba Corporation), F. Maeda, K. Shioda, K. Iwabuchi,
T. Tsuchiya, M. Okamoto
TS-147 Advanced Monitoring System For Combustor Pressure Fluctuation
H.Iba (Mitsubishi Heavy Industries, LTD.), M. Nomura, T. Kawakami,
T. Koga
TS-148 Sound Emission from Laminar Diffusion Flame with Controlled Oscillatory
Fuel Flow
K. Harumi (National Maritime Research Institute), M. Ikame, T. Kishi,
K. Hiraoka, H. Oka
TS-132 LES of Combustion Instabilities in a Lean Premixed Gas Turbine
Combustor
J. Shinjo (Japan Aerospace Exploration Agency), Y. Mizobuchi,
S. Ogawa
Session D-3 Micro Gas Turbine
TS-115 The Development of 300kW Class High Efficiency Micro Gas Turbine
“RGT3R”
R. Shibata (Niigata Power Systems Co., Ltd.), Y. Nakayama,
S. Machiya, K. Kobayashi
TS-116 Microturbocompressor Fuel Cell-Based Plants for Hybrid Engine
Applications
A. Soudarev (Boyko Research-Engineering “Ceramic Heat Engines”
Center (NIZ KTD), Russia), A. Souryaninov, A. Molchanov, P. Avran,
L. Lelait
TS-117 Combined Thermal Efficiency Evaluation and Dynamic Characteristics of
Micro Gas Turbine Centered Co-generation System
S. Kaneko (The University of Tokyo ), G. Fukuyama, T. Watanabe
TS-113 Development of a Small Jet Engine Test System for University Education
M. Tanabe (Nihon University), T. Kuwahara, K. Aoki
Session D-4 Combustor Development
TS-149 The Effects of Specifications of a Fuel Supply Unit with a New Concept for
a Dry Low NOx Gas Turbine Combustor
T. Wakabayashi (OSAKA GAS CO., LTD.), K. Moriya, S. Ito, S. Koga,
K. Shimodaira, Y. Kurosawa, K. Suzuki, O. Kawaguchi
TS-150 The Development of LPP Combustor for ESPR
T. Oda (Kawasaki Heavy Industries, Ltd.), Y. Kinoshita, M. Kobayashi,
H. Ninomiya, H. Kimura, S. Hayashi, H. Yamada, K. Shimodaira
TS-151 Development of Ultra Low-NOx Combustor Technology for Next
Generation Supersonic Transport Engines in ESPR Project
S. Hayashi (Japan Aerospace Exploration Agency), H. Yamada,
K. Shimodaira, S. Yoshida, T. Oda, H. Ninomiya, B. Jones
TS-152 Study on Pre-vaporized and Premixed Gas Turbine Combustion
Technology for High Carbon Ratio Fuel (HCRF)
Y. Marutani (Ishikawajima-Harima Heavy Industries Co, Ltd.),
T. Fujimori, D. Riechelmann, T. Mizutani, M. Mikami
Session D-5 Low Emission Combustor
TS-139 Intensification of Kinetic Combustion Performance in Hydrocarbon Fuels
When the Oxidizing Conversion Products are Used
V. V. Azatyan (Russian Academy of Sciences, Russia),
G. K. Vedeshkin, E. D. Sverdlov
TS-141 Conical Flameholder with Pilot Burner for Lean Premixed Combustion
T. Yamamoto (Japan Aerospace Exploration Agency), Y. Kurosawa,
S. Tachibana, S. Yoshida, K. Shimodaira, K. Suzuki
TS-142 Injection of Lean Mixtures into Hot Burned Gas for Maintaining Low-NOx
Emissions over an Extended Range of Fuel-Air Ratios in Prevaporized
Combustion
N. Aida (Hosei University), T. Nishijima, H. Yamada, S. Hayashi,
T. Kawakami
TS-135 Development of Low NOx Diffusive Burner Applying Spiral Flame
Combustion
N. Hiromitsu (Ishikawajima Harima Heavy Industries Co., Ltd.), J. Hosoi,
H. Toh , O. Kawaguchi
TS-136 Characteristics of Low NOx Diffusion Combustion with Strong Swirl Flow
J. Yajima (Keio University), T. Hasegawa, O. Kawaguchi, N. Hiromitsu,
J. Hosoi, H. Toh
Session D-6 Conjugate Heat Transfer Analysis
TS-083 Conjugate Heat Transfer Analysis of a Test Configuration for a
Film-cooled Blade
K. Kusterer (Aachen University, Germany), D. E. Bohn , T. Sugimoto,
R. Tanaka
TS-084 Numerical Parametric Study on Full Coverage Cooled Multi-Layer Plates
D. E. Bohn (Aachen University, Germany), N. Moritz
TS-085 Conjugate Simulations of Flow and Heat Conduction for Turbine Cooling
T. Yamane (Japan Aerospace Exploration Agency), F. Mimura,
T. Yoshida, S. Yamawaki, C. Nakamata, R. Imai
Session D-7 Impingement & Film Cooling
TS-074 Jet Impingement onto a Dimpled Surface with Different Crossflow
Schemes
K. Kanokjaruvijit (Imperial College London, United Kingdom),
R. F. Martinez-Botas
TS-075 Enhanced Impingement Heat Transfer: Comparison of Co-flow and
Cross-flow with Rib Turbulators
G. E. Andrews (The University of Leeds, United Kingdom), R.A.A. Abdul
Hussain , M. C. Mkpadi
TS-076 Heat Transfer in Impingement/Effussion Cooling System with Rib
Turbulators
Y. W. Nam (Yonsei University, Korea), D. H. Rhee, H. H. Cho
TS-077 Experimental Investigation on Heat Transfer and Film Cooling of High
Loaded Transonic Turbine Vanes and Blades
R. Nogami (Mitsubishi Heavy Industries, LTD.), K. Shimizu,
K. Takeishi, T. Kitamura
Session D-8 Flows in Rotating or Bended Duct
TS-063 Pressure Loss Characteristics in Rotating Coolant Passages of Gas
Turbine (Effect of Inlet Flow Angle in Intermediate Shaft)
H. Matsuda (TOSHIBA Corporation), F. Otomo, A. Inomata,
K. Kitayama, Y. Fukuyama
TS-064 Effects of Swirl and Flow Rate on the Flow and Heat Transfer in a
Pre-swirl Rotating-disc System
M. Farzaneh-Gord (University of Bath, United Kingdom), M. Wilson,
J. M. Owen
TS-065 Predictions of a Turbulent Flow Inside a Sharp U-Curve Duct for a Turbine
Blade Cooling Passage
R. S. Amano (University of Wisconsin-Milwaukee, USA), B. Song
Session E-1 Recuperator & Heat Exchanger
TS-110 Applications of Compact Size Recuperator on Vehicle Microturbines
R. Cui (Shenyang Liming Aero-Engine Group Corp., P.R.China), X. Wu,
K. Wang, B. Deng
TS-067 Development of CMC Heat Exchanger and Its Thermo-fluid Dynamics
Performance
T. Yoshida (Japan Aerospace Exploration Agency), T. Kumagai,
T. Yamane
TS-112 Development of Large Scale Recuperator for Gas Turbine
R. Akiyoshi （Ishikawajima-Harima Heavy Industries Co.,ltd.）, K. Imai,
T. Sioda, K. Ito, M. Hori
Session E-2 Blade Structure
TS-009 Bird Impact Analysis of Pre-Stressed Fan Blades Using Explicit Finite
Element Code
R. Jain (Gas Turbine Research Establishment, India), K. Ramachandra
TS-010 Reduction of Vibratory Stress of Compressor Blade by Use of Asymmetric
Vane Spacing
Y. Kaneko (Mitsubishi Heavy Industries, Ltd.), K. Mori, H.Okui
TS-011 Blade-Strength Assessment of a Marine Turbocharger under Development
F. Iwaki (Ishikawajima-Harima Industries Co., Ltd.), K. Mitsubori,
H. Taguchi, M. Obata, A. R. Mech
TS-012 Interface Construction for Thermal Stress Analysis in Virtual Turbine and
Its Application
J. Chen (Japan Aerospace Exploration Agency), A. Ogawa,
R. Hashimoto, T. Yoshida
Session E-4 Advanced Material
TS-126 Low Cost Manufacturing Process of Titanium Matrix Composite Ring
A. Kono (Mitsubishi Heavy Industries, Ltd.), T. Yamada, M. Hirota,
Y. Kawachi
TS-127 Development of Turbine Disk Materials for Aircraft Engines
S. Takahashi (Ishikawajima-Harima Heavy Industries Co., Ltd.),
S. Nishikiori, M. Hosoya, M. Arai, M. Takekawa, K. Tahara
TS-125 Technology Research on High Efficiency Gas Turbines Utilizing
Melt-Growth Composite Ceramics
K. Kobayashi (Engineering Association for High Performance Gas
Turbines(HPGT)), Y. Waku, N. Nakagawa, S. Yokoi
TS-128 Research and Development of Niobium-Based Superalloys for Hot
Components of Gas Turbines
R. Tanaka (Japan Ultra-high Temperature Materials Research
Institute(JUTEMI)), A. Kasama， M. Fujikura, I. Iwanaga, H. Tanaka,
Y. Matsumura
Session E-5 Rotor Dynamics & Bearing
TS-017 Experimental Invesigation of 150 mm Diameter Large Hybrid Foil/Magnetic
Bearing
H. Heshmat (Mohawk Innovative Technology, Inc., USA), D. S. Xu
TS-018 Static and Dynamic Characteristics of High Speed Multilobe Journal
Bearings
S. Strzelecki (Technical University of Lodz, Poland)
TS-019 Prototyping of Radial and Thrust Air Bearing for Micro Gas Turbine
S Kitazawa (The University of Tokyo), S. Kaneko, T. Watanabe
TS-015 Experimental Investigation into the Behavior of Misaligned Shafts on
Balanced Rotors
G. Hanish (Northumbria University, United Kingdom), P. S. Leung,
P. K. Datta
TS-016 Dynamics of Asymmetric Rotors using Solid Models
J. S. Rao (Quality Engineering and Software Technologies, India),
R. Sreenivas
Session E-6 Performance Analysis of Gas Turbines: Intake Air Humidifying &
Filtration
TS-090 A Study of Performance on Advanced Humid Air Turbine Systems
S. Higuchi (Hitachi, Ltd.), S. Hatamiya, N. Seiki, S. Marushima
TS-091 High Fogging Tests and Performance Model for High Fogging
J. Hoffmann (Alstom (Schweiz) AG, Switzerland), C. Ojo
TS-092 Outstanding Operational Behavior of Taylor-Made Nonwovens Filters for
Intake Air Filtration of Gas Turbines
M. Schmidt (Freudenberg & Vilene Nonwovens (Suzhou) Co., Ltd.,
P.R.China), S. Berbner, A. Klink, M. Waldenmaier, R. Schulz
Session E-7 Combustor Design
TS-143 Investigation of Cooling Structure with MGC Material for a High
Temperature Gas Turbine Combustor
T. Hagari (Kawasaki Heavy Industries, Ltd.), K. Ishida, Y. Kinoshita
TS-144 Effect of Primary Equivalence Ratio on Reducing both Fuel-NOx and
Thermal-NOx Emissions of the Gas Turbine Combustor for Oxygen-blown
IGCC with Hot/Dry Syngas Cleanup
T. Hasegawa (Central Research Institute of Electric Power Industry),
M. Sato
TS-145 Numerical/Experimental Methodology for the Retrofitting of Combustion
Chambers for Gas Turbines
F. Martelli (The University of Florence, Italy), G. Riccio, P. Adami,
G. Benelli, G. Tanzini
TS-134 Numerical Prediction of Turbulent Combustion Flows in Staged Combustor
Using LES and Extended G-Equation
T. Tominaga (The University of Tokyo), Y. Itoh, N. Taniguchi,
T. Kobayashi, T. Hagari, Y. Nonaka
Session E-8 Optimization & Inverse Method
TS-034 New Quasi-3D Inverse Navier-Stokes Based Method Used to Design
Highly Loaded Axial Compressor Stages
V. I. Mileshin (Central Institute of Aviation Motors, Russia),
S. K. Shchipin, A. N. Startsev
TS-035 Geometry Optimization of Turbine Blade with Surface Injection
T. Nagumo (Tokyo University of Science), K. Toda, M. Yamamoto
TS-036 The Development of a Genetic Algorithm Code for Secondary Flow
Injection Optimization in Axial Turbines
C. F. F. Favaretto (Iwate University), K. Funazaki, T. Tanuma
Session F-1 Forum: Wave Rotor 1
FR-301 Preliminary Design Procedure for Gas Turbine Topping Reverse-Flow
Wave Rotors
P. Akbari (Michigan State University, USA), N. Müller
FR-302 Introductory Investigation of Micro Wave Rotor
K. Okamoto (The University of Tokyo), T. Nagashima, K. Yamaguchi
FR-303 Internal Combustion Wave Rotors for Gas Turbine Engine Enhancement
R. Nalim (Indiana University Purdue University Indianapolis (IUPUI),
USA) , K. Pekkan
Session F-2 Forum: Wave Rotor 2 Oral Presentations
FR-304 Some thermodynamic studies on turbojet equipped with a Wave Rotor
Y. Ribaud (ONERA, France)
FR-305 Autonomous Pressure Wave Compressor Device
J. Piechna (Warsaw University of Technology, Poland)
FR-306 The General Compatibility Conditions of the Nonstationary Compressible
Flow in Stationary Periodic and Materially Balanced Pressure Wave
Machine
H. A. Nour Eldin (University of Wuppertal, Germany)
FR-307 Wave Rotors-A Historical Review including the Early Work on Pressure
Exchanger of Power Jets Ltd
J. A. C. Kentfield (University of Calgary, Canada)
Session F-3 Throughflow Modeling
TS-050 Theory and Design of the Regenerative Flow Compressor
A. Engeda (Michigan State University, USA), M. Raheel
TS-051 Flow in a High Speed Compressor Due to Axisymmetric Tip Clearance
H. S. Joo (Seoul National University, Korea), S. J. Song
TS-052 The Reduced Order Through-Flow Modeling of Axial Turbomachinery
O. Dubitsky (Concepts NREC, USA), A. Wiedermann, T. Nakano,
J. Perera
Session F-4 Diagnostics, Control & Measurement 1
TS-001 Fault Diagnosis System for an Industrial Gas Turbine by Means of Neural
Networks
J. Arriagada (Lund University, Sweden), M. Genrup, A. Loberg,
M. Assadi
TS-002 A Study on Intelligent Performance Diagnostics of a Gas Turbine Engine
Using Neural Networks
C. D. Kong (Chosun University, Korea), J. Y. Ki , M. C. Kang, S. H. Kho
TS-003 Neural Networks for the Study of Gas Turbine Engines Air System
G. Torella (Italian Airforce Academy, Italy), F. Gamma , G. Palmesano
TS-004 Statistical Analyses to Improve Gas Turbine Diagnostics Reliability
R. Bettocchi (University of Ferrara, Italy), M. Pinelli, P. R. Spina,
M. Venturini
Session F-5 Diagnostics, Control & Measurement 2
TS-005 Detection and Prediction of the Performance Deterioration of a Turbofan
Engine
L. Marinai (Cranfield University, United Kingdom), R. Singh, B. Curnock,
D. Probert
TS-006 Performance Analysis and Diagnostics of a Small Gas Turbine
J. Yin (Cranfield University, United Kingdom), M. S. Li, W. M. Huang
TS-007 A Study on Applying Nonlinear Control to Gas Turbine Systems
M. Ashikaga (Kawasaki Heavy Industries, Ltd.), Y. Kohno, M. Higashi,
K. Nagai , M. Ryu
TS-153 The Development of Operation System of a Liquid-fueled Micro Gas
Turbine
Y. Mori (The University of Tokyo), S. Kaneko, T. Watanabe
TS-008 Numerical Correction of Pyrometry Data from Gas Turbines
J. Nickel (Technical University Berlin, Germany), H. Pucher, M. Lüdtke
Session F-7 Performance Analysis of Gas Turbines & New Systems
TS-086 A Comparative Investigation of Reheat in Gas Turbine Cycles
K. Sarabchi (University of Tabriz, Iran)
TS-087 A Novel LNG and Oxygen Stoichiometric Combustion Cycle without CO2
Emission
W. Wang (Chinese Academy of Sciences, P.R.China), R. Cai, N. Zhang,
H. Jin
TS-089 Off-Design Analysis of the GRAZ Cycle Performance
A. Miller (Warsaw University of Technology, Poland), J. Lewandowski,
K. Badyda, S. Kiryk, J. Milewski, J. Hama, N. Iki
Session F-8 Performance Analytic Modellings & Tool
TS-093 Thermodynamic Table for Performance Calculations in Gas Turbine Engine
M. Iwai (Shenyang Institute of Aeronautical Engineering, P. R. China)
TS-094 Low Bypass Ratio Turbofan Performance Modelling with Fan Radial Flow
Profiles
M. S. Li (Cranfield University, United Kingdom), J. F. Yin, B. Curnock
TS-095 An Improved Analytic Model to Predict Fouling Phenomena in the Axial
Compressor of Gas Turbine Engines
T. W. Song (Seoul National University, Korea), J. L. Sohn, T. S. Kim,
J. H. Kim, S. T. Ro
 |
この成果物は、PDF形式でも作成されています。ご覧になるためにはあらかじめAcrobat Readerが必要です。「Get Acrobat」ボタンをクリックして無料のAcrobat Readerを入手する手順をご確認下さい。 |
|
