6 Design stresses The design stresses are based on laminates with values according to table 10 or with the as stated values. The allowable design stresses σa shall not be greater than given in this section. 6.1 Shell 6.1.1 Plating
6 Design stresses
The design stresses are based on laminates with values according to table 10 or with the as stated values.
The allowable design stresses σa shall not be greater than given in this section.
6.1 Shell
6.1.1 Plating
Table 3 - Design stresses for plating
where
前ページ 目次へ 次ページ
