|
ISO/TC8 N 966 ANNEX3
Document number ISO/TC 8/SC 3 N 280
date 2002-10-04
total pages 11
item nr.
Supersedes document N 234 |
Secretariat USA/ ANSI/ USCG 2100 2nd St. SW Washington, DC 20593
Telephone: (202) 267-0030
Fax: (202) 267-4816
E-mail: rmartin@comdt.uscg.mil |
ISO/TC 8/SC 3
Title: Ships and Marine Technology Piping and Machinery Subcommittee
Secretariat: USA/ ANSI/ USCG |
|
Report on progress of work in ISO/TC 8/SC 3
1. Title and scope:
Title: Piping and Machinery
Scope: Standardization of design, construction, equipment and technology for piping and machinery used in shipbuilding and the operation of ships, comprising sea-going ships, fishing vessels and trawlers, vessels for inland navigation, offshore structures, and ship-to-shore interfaces, and all other marine structures subject to IMO requirements.
2. Secretariat and Chairman:
USA / ANSI / USCG
Chairman: - Mr. Thomas M. Hopkins
Secretariat: - Commander Raymond W. Martin
3. Participation and liaisons:
3.1. P-members (14*): China, Germany, Italy, Japan, Korea, Netherlands, Norway, Portugal, Romania, Russian Federation, Switzerland, Ukraine, United Kingdom, and USA
3.2. O-members (10*): Brazil, Bulgaria, Croatia, Cuba, Denmark, India (*), Poland, Slovakia, Spain, Sweden (*)
3.3. External Liaisons: IMO - Ship Design and Equipment Subcommittee (DE), IACS, ILO, SNAME (Ship's Machinery Committee)
3.4. Internal Liaisons: ISO/TC 10/SC 10, ISO/TC 67/SC 6, ISO/TC 138, ISO TC/70
4. Constitution:
4.1. Working Groups (6*)
4.1. Working Groups - cont.
WG 1 Piping and ducting systems - Identification colours
Convener: Maja Buntrock of Germany (DIN)
Participation: Finland, Germany, Japan, Netherlands, Norway, Sweden, United Kingdom, and USA
WG 4 Epoxy resin fibreglass pipe and fittings for shipboard use
Convener: Mr. Richard H. Lea (Specialty Plastics, Inc.) USA (ANSI)
Participation: Japan, Romania, Russian Federation, United Kingdom, and USA
WG 6 Potable water systems and drainage systems
Convener: Maja Buntrock of Germany (DIN)
Participation: Germany, Japan, Romania, Russian Federation, United Kingdom, and USA
WG 7 Heating, ventilation and air conditioning
Convener (*): Mr. Spunner of the USA (ANSI)
Participation: Germany, Japan, and USA
WG 8 Piping Systems
Convener (*): Mr. Marcel Beer of Switzerland
Participation: Germany, Japan, Romania, Russian Federation, Switzerland, United Kingdom, and USA
WG 9 Oil Systems
Convener: Mr. Richard D. Delpizzo (ABS Americas) of the USA (ANSI)
Participation: Germany, Italy, Sweden, United Kingdom, USA
5. Programme of work:
5.1 List of published standards (30*):
(03.01) ISO 484/1: 1981-08-15 "Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part 1: Propellers of diameter greater than 2,50 m"
(03.02) ISO 484/2: 1981-08-15 "Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive"
(03.03) ISO/R 538: 1967-01 "Conventional signs to be used in schemes for the installations of pipeline systems in ships" [to be superseded by ISO 14617 (ISO/TC 10)
(03.04) ISO/R 644: 1967-12 "Conventional signs to be used in schemes for the installations of ventilation systems in ships" [to be superseded by ISO 14617 (ISO/TC 10)]
(03.05) ISO/R 784: 1968-07 "Conventional signs to be used in schemes for the installations of sanitary systems in ships" [to be superseded by ISO 14617 (ISO/TC 10)]
(03.06) ISO 3715: 2002 "Ships and marine technology -- Propulsion plants for ships -- Part 1: Vocabulary for geometry of propellers"
(03.07) ISO 5483: 1977-07-01 "Shipbuilding - Oil and water drain screws"
(03.08) ISO 5571: 1981 04-15 "Shipbuilding - Identification colours for schemes for ventilation systems"
(03.09) ISO 5620-1: 1992-12-01 "Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 1: General requirements"
(03.10) ISO 5620-2: 1992-12-01 "Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 2: Components"
(03.11) ISO 5621: 1984-12-01 "Shipbuilding - Bilge mud boxes for machinery spaces and tunnels - General design characteristics"
[Confirmed by periodical review ballot 1999-06-30.]
(03.12) ISO 5625: 1978-07-01 "Shipbuilding - Welded bulkhead pieces with flanges for steel pipework - PN 6, PN 10 and PN 16"
[Confirmed by periodical review ballot 1999-06-30.]
(03.13) ISO 6454: 1984-12-01,"Shipbuilding - Strum boxes"
[Confirmed by periodical review ballot 1999-06-30.]
(03.14) ISO 7547: 2002 "Ships and marine technology - Air conditioning and ventilation of accommodation spaces - Design conditions and basis of calculations"
(03.15) ISO 8861: 1998-05-15 "Shipbuilding - Engine room ventilation in diesel-engine ships - Design requirements and basis of calculations"
(03.16) ISO 8862: 1987-03-01 "Air-conditioning and ventilation of machinery control-rooms on board ships - Design conditions and basis of calculations"
(03.17) ISO 8863: 1987-03-15 "Ship's wheelhouse windows - Heating by hot air of glass panes"
(03.18) ISO 8864: 1987-03-15 "Air conditioning and ventilation of wheel house on board ships - Design conditions and basis of calculations"
(03.19) ISO 9099: 1987-04-01 "Air conditioning and ventilation of dry provision rooms on board ships - Design conditions and basis of calculations"
(03.20) ISO 9785: 2002 "Ships and marine technology - Ventilation of cargo spaces where internal combustion engine vehicles may be driven - Calculation of theoretical total airflow required"
(03.21) ISO 9943: 1991-01-15 "Shipbuilding - Ventilation and air treatment of galleys and pantries with cooking appliances"
(03.22) ISO 13617: 2001 "Shipbuilding - Shipboard incinerators - Requirements"
(03.23) ISO 14726-1: 1999-12-01 "Ships and marine technology - Identification colours for the content of piping systems - Part 1: Main colours and media"
(03.24) ISO 14726-2: 2002 "Ships and marine technology - Identification colours for the content of piping systems - Part 2: Additional colours for media and/or functions"
(03.25) ISO 15364: 2000 "Ships and marine technology - Pressure/vacuum valves for cargo tanks"
(03.26) ISO 15540: 1999 "Ships and marine technology - Fire resistance of hose assemblies - Test methods" with Technical Corrigendum 1
(03.27) ISO 15541: 1999 "Ships and marine technology - Fire resistance of hose assemblies - Requirements on the test bench"
(03.28) ISO 15748-1: 2002 "Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design"
(03.29) ISO 15748-2: 2002 "Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation"
(03.35) ISO 3715-2: 2001 "Ships and marine technology - Propulsion plants for ships - Part 2: Vocabulary for controllable-pitch propeller plants"
|
