Fig. 8 Distribution of nominal film thickness (θ_c=15℃ )

Fig. 9 Distribution of nominal film thickness (θ_c=42℃ )

Fig. 10 Effect of σ and γ on h_min and p_max

　

References

　

[1] Wakuri,Y.,Hamatake.T. and SoeJrma M Bull JSME Vol.25, No.207(1982), p.1457.

[2] Wakuri,Y.,Hamatake,T. and Soejima,M., ProC.JSLE Int. Tribol. Conf., Vol. II (1985), p.325.

[3] Wakuri.Y.,Hamatake,T. and Soejima.M., 17th CIMAC Paper D-41(1987).

[4] Wakuri,Y.,Hamatake,T. and Soejima M Bull MESJ Vol.6, No.1(1988), p.1.

[5] Wakuri,Y.,Hamatake,T.,Soejima,M. and Ohtsubo,M., Proc. ISME KOBE90, Vol, II B-4(1990), p.17,

[6] Bulter.J.F. and Orbeck,F., Proc.Inst.Mech., Vol.181, Pt3B(1966-67), p.10.

[7] Scobel,H., Marine Engr. and Naval Arch., Vol.94, No.1 147(1971), p.410.

[8] Wakuri,Y.,Kitahara,T.,Hamatake,T. and Soejima.M., Proc.22nd CIMAC, Vol.6(1998), p.1523.

[9] ten Napel.W.E. and Bosma.R., Tribology of Reciprocating Engines, (1983), p.37, Butterworths.

[10]Takasaki,M. and Ettles,C.M.McC., Trans.ASME, Vol. 107(1985), p.104.

[11]Wakuri,Y.,Ono,S. and Soejima,M., Bull.MESJ, Vol.11,

No.1(1983), p.1.

[12]Wakuri,Y.,Ono,S. and Soejima,M.. Bull.JSME, Vol.28, No.243(1985), p.2112.

[13]Wakuri,Y. and Soejima,M., ProC.JSLE Int. Tribol. Conf., Vol. II (1985), p.319.

[14]Booker,J.F.,Goenka,P.K. and van Leeuwan H, J., Trans ASME, J.Labr.Technol., Vol.104 (1982), p.478.

[15]Booker.J.F. and Olikara.P., Trans. ASME, Vol.106 (1984), p.352.

[16]Goenka,P. and Booker,J.F,, Trans.ASME, Vol.10s⁵ (1983), p,1.

[17]Martin,F., Tribology of Reciprocating Engines, (1983), p.9, Butterworths.

[18]Wakuri,Y.,Hamatake,T. and SoeJima M JSME Int. Ser. II , Vol.32, No.4(1989), p.663.

[19]Patir,N. and Cheng,H.S., Trans.ASME, Ser.F, Vol.100, No.1(1978), p.12.

[20]Patir,N. and Cheng,H.S., Trans.ASME, Ser.F. Vol.101, No.2(1979), p.220.

[21]Rohde.S.M.. Proc. of the 7th Leeds-Lyon Sympo. on Tribol., (1980), p.9-62.

[22]Greenwood,J.A, and Tripp,J.H., Proc,Inst.Mech.Eng., Vol.185(1970-71), p.625.

[23]Dowson,D.,Taylor,C.M., Fluid Film Lubrication-Osborne Reynolds Centenary,(1986), p.599, Butterworths,

[24]Wang,O. and Cheng,H.S.. STLE Tribol.Trans., Vol.38, No32(1995), p.654.

[25]Wang,Q.,Shi,F. and Lee,S.C., Trans.ASME, Vol. 119(1997), p.456.

[26]Ai,X.,Cheng,S.H.,Hua,D.,Moteki,K. and Aoyama,S., STLE Tribol.Trans., Vol.41, No.2(1998), p,273 .

[27]Lee,S.C. and Ren,N., STLE Tribol.Trans., Vol.39, No.1 (1996), p.67.

BACK　　　CONTENTS　　　NEXT