(Oil spill Identification)
CEN/TC 300 takes note of the today's status of the processing of the PQ on the Nordtest document NTC 001: 1991 - "Oil spill identification".
CEN/TC300 notes with the deepest concern that CMC has not given CEN/TC 300 the opportunity to express Its position to the content of the actual document and its further progressing in CEN.
CEN/TC300 is prepared to offer its maritime competence with respect to issues like:
- main types of samples
- collection of samples from the water surface
- obtaining samples from ships
- taking samples In machinery spaces of ships which are included in the actual document.
Resolution 100-2000
(Report from CEN-Workshop)
CEN/TC 300 takes note of the report from the CEN-Workshop on "Multimode and interoperable Transport Standardization" given by Mr. Molstrand, DS In, CEN/TC300 doc. N 207.
CEN/TC300 agrees that the issues identified during the workshop
- environmental impact and emission data
- energy consumption end comparison data
- intermodal transport systems and equipment
are actual for the maritime industry and maritime standardization, CEN/TC300 will give priority to these issues, preferably in close cooperation with CEN/TC15.
Resolution 101-2000
(Emission data and energy consumption)
CEN/TC 300 decides to take up standardization on
- environmental impact and emission data
- energy consumption and comparison data
with respect to the maritime industry in its field of standardization activities.
CEN/TC300 allocates work on these issues to e new CEN/TC300/WG3 given the title "Exhaust emissions and energy consumption".
This WG 3 is created under the assumption that sufficient support in the form of experts, contribution and administrative resources will be available.
CSN/TC 300/WG3 will Intentionally operate as a joint CEN/TC300 and CEN/TC15 working group.
International regulations given by IMO and documents In coordination: between IMO and ISO/TC 8 in this respect shall be observed
Existing international standards e.g. from ISO/TC70 shall be taken into account.
