MECHANICAL PERFORMANCE OF COMPOSITE PRODUCTION RISERS

References

1.　Sparks, C.P.,“Lightweight Composite Production Risers for a Deepwater Tension Leg Platform”, Proceedings of the fifth International Symposium OMAE (Tokyo), April 1986.

2.　Sparks, C.P.; Odru, P.; Bono, H.; Metivaud, G.,“Mechanical Testing of High-Performance Composite Tubes for TLP Production Risers”, OTC 5797, Proceedings of the Offshore Technology Conference, Houston, May 1988.

3.　Sparks, C.P.; Odru, P.; Metivaud, G.; Le Floc'h, C.,“Composite Riser Tubes: Defect Tolerance Assessment and Nondestructive Testing”, OTC 6594, Proceedings of the Offshore Technology Conference, Houston, May 1992.

4.　Baldwin, D.D.; Newhouse, N.L.; Lo, K.H.; Burden, R.C.,“Composite Production Riser Design”, OTC 8431, Proceedings of the Offshore Technology Conference, Houston, May 1997.

5.　Baldwin, D.D.; Lo, K.H.; Long, J.R.,“Design Verification of a Composite Production Riser”, OTC 8664, Proceedings of the Offshore Technology Conference, Houston, May 1998.

6.　Drey, M.D.; Salama, M.M.; Long, J.R.; Abdullah, M.G.; Wang, S.S.,“Composite Production Riser - Testing and Qualification”, OTC 8432, Proceedings of the Offshore Technology Conference, Houston, May 1997.

7.　Johnson, D.B.; Salama, M.M.; Long, J.R.; Wang, S.S.,“Composite Production Riser - Manufacturing Development and Qualification Testing”, OTC 8665, Proceedings of the Offshore Technology Conference, Houston, May 1998.

8.　Robinson, E.Y.,“Design Prediction for Long-Term Stress Rupture Service of Composite Pressure Vessels, Aerospace Report No. ATR-92(2743)-1”, Development Group, The Aerospace Corporation, El Segundo, CA, 1 December 1991.

TABLE 1. BASIC CPR DESIGN PARAMETERS

TABLE 2. SOME OF THE ALLOWABLE STRENGTH VALUES THAT ARE USED IN PREDICTING THE FAILURE ENVELOPE

TABLE 3. DESIGN CHARACTERIZATION TESTING OF 65 PROTOTYPE SPECIMENS

前ページ　　　目次へ　　　次ページ