4 Nominal bore Table 1 gives some nominal bores, based on the R 10 series in ISO 32). Tolerances shall be as indicated in Table 1 or conform to ISO 1307.
4 Nominal bore
Table 1 gives some nominal bores, based on the R 10 series in ISO 32). Tolerances shall be as indicated in Table 1 or conform to ISO 1307.
Table 1 - Nominal bores and tolerances
Dimensions in millimetres
5 Physical tests on finished hose 2) ISO 3:1973, Preferred numbers - Series of preferred numbers.
5 Physical tests on finished hose
2) ISO 3:1973, Preferred numbers - Series of preferred numbers.
前ページ 目次へ 次ページ
