1 Scope
This International Standard establishes requirements for design and installation of engine mounted fuel and electrical system components on diesel inboard-mounted engines for minimising fuel leakage and the risk of and/or the spread of fire on small craft of up to 24 m length of hull.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of IEC and ISO maintain registers of currently valid International Standards.
ISO 7840:1994, Small craft - Fire-resistant fuel hoses.
ISO 10088: - 1 , Small craft - Permanently installed fuel systems and fixed fuel tanks
ISO 10188: - 2, Small craft - Electrical systems - Extra-low voltage d.c. installations
3 Terms and definitions
For the purposes of this International Standard, the following terms and definitions apply.
3.1
engine-mounted
component securely fixed by the manufacturer to the marine inboard engine and which will be in place while the engine is in operation
3.2
electrical component
component which is operated by electrical current or generates an electrical current through mechanical operation
3.3
diesel
hydrocarbon fuel or blends of hydrocarbon fuels which are liquids at atmospheric pressure and are used in compression ignition engines
1 To be published. (Revision of ISO 10088:1992)
2 To be published. (Revision of ISO 10133:1994)
