DRAFT INTERNATIONAL STANDARD
1 Scope
This International Standard specifies the requirements for the design, materials, construction, installation and testing of permanently installed fuel systems and fixed fuel tanks for internal combustion engines.
It applies to all parts of permanently installed diesel and petrol fuel systems and fixed fuel tanks, from the fuel fill opening to the point of connection with the propulsion or auxiliary engine on inboard- and outboard-powered small craft of up to 24 m hull length.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of IEC and ISO maintain registers of currently valid International Standards.
ISO 3:1973, Preferred numbers - Series of preferred numbers.
ISO 1817:1985, Rubber, vulcanized - Determination of the effect of liquids.
ISO 7840:1994, Small craft - Fire resistant fuel hoses.
ISO 8469:1994, Small craft - Non-fire-resistant fuel hoses.
ISO 8846:1990, Small craft - Electrical devices - Protection against ignition of surrounding flammable gases.
ISO 9094-1: - 1), Small craft - Fire protection - Part 1: Craft with a hull length of up to and including 15 m.
ISO 9094-2: - 1), Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m and up to and including 24 m.
ISO 10133: - 2), Small craft - Electrical systems - Extra-low-voltage d. c. installations.
ISO 10239: - 1), Small craft - Liquefied petroleum gas (LPG) systems.
ISO 11105:1997, Small craft - Ventilation of petrol engine and/or petrol tank compartments.
ISO 11192 - 1), Small craft - Graphical symbols.
ISO 13297: 3), Small craft - Electrical systems - Alternating current installations
1) To be published.
2) To be published. (Revision of ISO 10133:1994)
3) To be published. (Revision of ISO 13297:1995)
