Low-voltage shipboard power cable - General construction and test requirements： introduction of ozone resistance test for sheathing material and introduction of HEPR or HF HEPR compound for insulating materials
Amendment 2 to IEC 60092-359
Sheathing materials for shipboard power and telecommunication： introduction of ozone resistance test for sheathing material
2.3.3. ･ 4 CD progress to CDV
Amendment 3 to IEC 60092-351
Insulating materials for shipboard power, telecommunication and control data cables： introduction of HEPR and HFEPR
Amendment 1 to IEC 60092-353
Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kV and 3 kV： introduction of HEPR and HFEPR, and informative annex for alternative enhanced thickness.
Amendment 2 to IEC 60092-353
Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kV and 3 kV ： to include provision for the fire resistant types of cables (limited circuit integrity)
Amendment 3 to IEC 60092-350
Low-voltage shipboard power cable - General construction and test requirements： addition of class 5 conductors in cables for fixed installation
2.3.4. ･ 3 CD to be re-issued as 2CD stage
New part to IEC 60092-377
150/250 V screened cables for control and instrumentation circuits - Pairs and triples
IEC 60092-374 revision
Shipboard telecommunication cables and radio frequency cables. Telephone cables for non-essential communication services
IEC 60092-376
Shipboard multicore cables for control circuits.
2.3.5. ･ Revision of the documents in the maintenance cycle
Amendment 1 to IEC 60092-375
Shipboard telecommunication cables and radio frequency cables. General instrumentation, control and communication cables. Revision of the document in maintenance cycle.
2.3.6. ･ Ad-hoc task-force was set-up to revise the installation thickness and to discuss voltage application.
2.4. WG1 WORK
･ WG1 continues its work on the revision of IEC 60092-352 in order to cover the off-shores units, after the request of TC 18 to work on draft IEC 1892. The CD will be presented within 2 months both to 18A and 18/WG18.
･ High voltage cables need to be considered with respect to voltages up to 33 kV - the IEC 60502-2 could be used if its scope is amended.
