REFERENCES
1. K. Collinge, Lycoming AGT 1500 powers the MI Abrams. Global Gas Turbine News, May.4-7 (1994).
2. C. F. McDonald. Recuperator utilization for gas turbine plant performance enhancement-applications and technology. Proc. 1990 ASME COGEN-TURBO, IGTI-5, pp. 151-163 (1990a).
3. D. C. Wilson and L. Wood, Design analysis of high-efficiency low-stress ceramic gas turbines. ASME Paper 81-GT-130(1981).
4. T. P. Korakianitis and D. G. Wilson, Improvements in part-load efficiency by reducing pressure ratio in regenerative gas turbine engine. ASME Paper 85-GT-147 (1985).
5. C. F. McDonald, Heat exchanger ubiquity in advanced gas turbine cycles, Proc. ASME COGEN POWER 94, IGTI 9, pp.681-703(1994).
6. R.Farmer and K.Fulton,Design 60% net efficiency in frame 7/9H steam-cooled CCGT.Gas Turbine World,May/June,12-20(1995).
7. D. G. Wilson, The Design of High Efficiency Tubomachinery and Gas Turbines. The MIT Press, Cambridge, MA (1984).
8. K. Kretzinger et al., Gas turbine recuperators. Garrett Technical Paper 85-22130, Rev.5, January (1985).
9. D. G. Wilson, Automotive gas turbine pioneers. Global Gas Turbine News, May/June, 8-11 (1995a).
10. J. R. Norbye, The Gas Turbine Engine Design Development and Applications. Chilton Book Company, Radnor, PA(1975).
11. G. L. Boyd and D. M. Kreiner, AGT101/ATTAP ceramic technology development. ASIME J. Engng Power 111,58-167(1989).
12. T. Nishiyama et al., Status of the Automotive Ceramic Gas Turbine Development Program-Year Four progress.ASME Paper 95-GT-447(1995).
13. K. Jost, The Patriots Hybrid-Electric Drivetrain. Automotive Engng, December, 30-33(1994).
14. M. Valenti, Hybrid car promises high performance and low emissions. Mech. Engng, July, 44-49(1994).
15. R. MacKay, Gas turbine generator sets for hybrid vehicles. SAE Paper 9200441 (1992).
16. R. MacKay, Hybrid vehicle gas turbines. SAE Paper 930044 (1993).
17. R. MacKay, Development of a 24 kW gas turbine-driven generator set for hybrid vehicles. SAE Paper 940510 (1994).
18. R. MacKay, Hybrid turbine engine. SAE Paper 951899 (1995),
19, P. O Brien. Development of a 55 kW low emission turbo generator for hybrid electric vehicles. SAE Paper 951969(1995).
20. R. Lundberg and R. Gabrielsson, Progress on the AGATA Project-a European ceramic gas turbine for hybrid vehicles. ASME Paper 95-GT-446.
21. R. Harmon, Alternative vehicle propulsion systems. Mech. Engng, March, 58-65 (1992).
22. D. G. Wilson, Turbine cars: much potential, bumpy road. Technol. Rev.98, February/March, 50-57 (1995b).
23. A. C. Pfahnl and D.G. Wilson, Key issues in the general design of the motor vehicle gas turbine engines. ASME Paper 95-GT-393 (1995).
24. R. J. Duffy and G. K. Hower, Turbine propulsion for heavy armored vehicles. AIAA Paper 87-1911 (1987).
25. C. Banthin and j. Deman, Battle tanks of the future-a need for turbine power. ASME Paper 88-GT-43 (1982).
26. W. Brockett and A. Koschier, LVl00 AIPS technology-for future army propulsion. ASME Paper 92-GT-391 (1992).
27. E. R. Danielson and Hitchock, Ground turbine engines: which cycle is best. SAE Paper 950774 (1995).
28. C. F. McDonald, Recuperator utilization-a key factor for future marine gas turbine propulsion. Proc. I.Mech.E.Seminar on Affordable Gas Turbine Developments for Marine Applications. London, 5 October 1995 (1995a).
29. J. E. Harmeyer, ICR gas turbine update. ASME Paper 95-GT-429 (1995).
30. C. F. McDonald, Gas turbine recuperator technology advancements. Proc. Institute of Materials Conf. on Materials Issues in Heat Exchangers and Boilers, Loughborough, UK, 17 October 1995 (1995b).
31. C. F. McDonald, Gas turbine recuperator renaissance. J. Heat Recovery 10, 1-30 (1990b).
32. G. Pellischek and E. Reile, Compact energy recovery units for vehicular gas turbines. SAE Paper 920151 (1992).
33. H. F. Jen, Primary surface recuperator for vehicular gas turbine. SAE Paper 871590 (1987).
34. V. Kadambi et al., Primary surface heat exchanger for a ground vehicle gas turbine. SAE Paper 920148 (1992).
35. E. L. Parsons, Development, fabrication, and application of a primary surface gas turbine recuperator. SAE Paper 851254 (1985).
36. M. E. Ward and L. Holman. Primary surface recuperator for high performance prime-mover. SAE Paper 920150 (1992).
37. R. A. Wilson et al., Future vehicular recupcrator technology projections. ASME Paper 94-GT-395.
38. C. F. McDonald, The role of the ceramic heat exchanger in energy and resource conservation. ASME J. Engng Power 102. April, 303-315 (1980).
39. AlliedSignal, Space Power 1991 and Beyond. AlliedSignal, Garrett Fluid Systems Division Publication.41-9270A (1992).
40. K. O. Parker and M. G. Coombs. New developments in compact plate-fin heat exchangers. ASME Publication on Compact Heat Exchangers. HTD. Vol. 10. pp. 171-179 (1979).
41. S. Forster and M. Kleeman. Compact metallic and ceramic recuperators for gas turbines. ASME Paper 78-GT-62(1978).
42. W. T. Bakker and D. Kotchick, Development of ceramic heat exchangers for indirect fired gas turbines. ASME Paper 82-GT-182.
43. R. N. Kleiner et al., Highly compact ceramic recuperator for engine application. ASME Paper 84-GT-50 (1984).
44. P. Avran and S. Boudigues, Ceramic heat exchangers in gas turbine. Proc. 1989 ASME COGEN-TURBO Symp. IGTI. Vol.4,pp. 105-112 (1989).
45. Y.Yoshimura et al., Development of shell and tube type ceramic heat exchanger for CGT301.ASME Paper 95-GT-208 (1995).
46. J. C. Lanning and D. Wardale, The development of a glass ceramic axial flow regenerator. ASME Paper 66-GT-107 (1966).
47. N. Penny, The development of the glass ceramic regenerator for the Rover 25/l50R engine, SAE Paper 660361 (1966).
48. j. A. Ritchie et al., Regenerator development for the British Leyland 25/350R gas turbine. ASME Paper 74-GT-149 (1974).
49. D. S. Beck, A compact lightweight gas-turbine regenerator. ASME Paper 95-GT-209 (1995).
50. C. J. Rahnke and J. K. Valiance, Reliability and durability of ceramic regenerators in a gas turbine. ASME Paper 77-GT-59 (1977).
51. J. Sayama and T. Morishita, Development of a regenerator for an automotive gas turbine engine. ASME Paper 92-GT-27
52. W. Beck and D. G. Wilson. Regenerators for Gas Turbine Applications. Chapman and Hall, New York (1995).
53. D. G. Wilson, Novel regenerative heat exchanger concept. The MIT Report (1988).
54. D. G. Wilson, Low-leakage and high-flow regenerators for gas-turbine engines. Proc. Inst. Mech. Engrs 207,195-202 (1993).
55. P. Avran and S. Boudigues. Comparison of regenerators and fixed heat exchangers for automotive applications. Proc. 1991 Yokohama International Gas Turbine Conf.11, 283-289 (1991).
