| Working Group/Convenor |
ISO No. & title (the introductory element "Small craft"
omitted)
*/ ** = mandated/proposed
to be mandated h = harmonized |
Notes |
WG 1 Propeller
tapers
R. Lambrecht |
ISO 4566:1992 - Small craft with inboard engine - Propeller
shaft ends and bosses with 1:10 taper |
Circulated for Systematic review. Closing date 2002-06-30 |
| ISO 8845:1994 - Small craft with inboard engine - Propeller
shaft ends and bosses with 1:16 taper |
|
WG 2 Inflatable
boats
T. Fleming |
ISO 6185-1 - Inflatable boats - Part 1: Boats with
a maximum motor power rating of 4,5 kW * |
ISO standard published 2001-11-15 |
| DIS 6185-2 - Ditto - Part 2: Boats with a maximum motor
power rating of 4,5 kW to 15 kW inclusive * |
ISO standard published 2001-11-15 |
| DIS 6185-3 - Ditto - Part 3: Boats with a maximum motor
power rating of 15 kW and greater * |
ISO standard published 2001-11-15 |
WG 3 Deck
fittings and rigging parts
G. Dolto |
ISO/TR 4558:1985 - Rigging screws for stainless steel
wire rope Principal dimensions for forks, connection pins and eye-holes |
|
| ISO 4559 :1978 - Shipbuilding - Tracks for yachts -
Interchangeability dimensions |
|
| FDIS 15085 - Man overboard prevention and recovery * |
FDIS is sent from ISO CS to CMC asking for information regarding
the CEN Consultant's assessment 2002-06-14 |
WG 4 Anchor chains
(Vacant) |
ISO 4565:1986 - Anchor chains |
ISO 4565 was withdrawn 2002-01-17. The WG has not yet been
dissolved in the ISO Database and for that reason we wait for the NWIP Germany
will prepare regarding "Anchor chains". |
WG 5 Engine
and propulsive systems
S. Behrmann |
DIS 7840 - Fire resistant fuel hoses h |
DIS sent to ISO CS 2002-04-10 and to AFNOR and DIN for translation.
F- and D- versions have been prepared. |
| ISO 8469:1994 - Non-fire-resistant fuel hoses h |
It was decided at the TC 188 plenary meeting to revise ISO
8469, See Resolution 307 |
| CD 8665 - Marine propulsion engines and systems - Power
measurements and declarations h |
DIS will be discussed at the WG 5 meeting in Victoria |
| ISO 10088:2001 - Permanently installed fuel systems
and fixed fuel tanks * |
ISO standard published 2001-05-01 |
| ISO 11547:1994 - Start-in-gear protection h |
|
| (contin. WG 5) |
ISO 13342:1995 - Static thrust measurement for outboard
motors |
|
| ISO 13591:1997 - Portable fuel systems for outboard
motors |
Circulated for Systematic review. Closing date 2002-06-30 |
| ISO 13592:1998 - Backfire flame control for petrol
engines |
|
| ISO 15584:2001 - Inboard-mounted petrol engine fuel
and electrical systems components * |
ISO standard published 2001-03-15 |
| FDIS 16147 - Inboard-mounted diesel engine fuel and
electrical systems components ** |
FDIS is circulated for voting. Voting begins on 2002-06-13
and voting terminates on 2002-08-13. |
WG 6 Retention
systems
R. Lambrecht |
ISO 4567:1978 - Shipbuilding Yachts - Waste water fittings |
No objections have been received to the draft withdrawal of
ISO 4567. ISO CS will therefore announce this withdrawal shortly. |
| ISO 8099:2000 - Toilet waste retention systems * |
ISO standard published 2000-12-15 |
WG 7 Steering
gear
Dennis Graham |
DIS 8847 - Steering gear - Wire rope and pulley systems h
(Revision of ISO 8847:1987) |
The draft has not moved for three years in the ISO/CS database.
DIS 8847 has automatically been cancelled 2002-03-04. At the TC 188 plenary meeting
it was decided to re-instate ISO 8847 in the program of work. See Resolution 308. |
| ISO 8848:1990 - Remote steering systems |
|
| ISO 9775:1990 - Remote steering systems for single
outboard motors of 15 kW to 40 kW power h |
|
| ISO 10592:1994 - Hydraulic steering systems h |
|
| ISO 13929:2001 - Steering gear - Geared link systems * |
ISO standard published 2001-01-15 |
| DIS 15652 - Remote steering systems for inboard mini
jet boats ** |
DIS has been approved. Exemption of FDIS stage is allowed.
E-mail sent to the convenor 2001-12-07. A final text is awaited |
WG 9 Main
dimensions of the craft and identification of the hull
F. Hartz |
FDIS 8666 - Principal data * |
FDIS is circulated for voting. Voting begins on 2002-06-13
and voting terminates on 2002-08-13 |
| ISO 10087:1995 Hull identification - Coding system h |
The standard is under revision |
| FDIS 14945 - Builder's plate * |
FDIS 14945 was cancelled, because the document was in conflict
with the Directive. The standard is in line with the wording of the new Directive. |
| ISO 14946:2001 - Maximum load capacity * |
ISO standard published 2001-09-15 |
WG 10 Electrical
equipment
R. Lambrecht |
ISO 8846:1990 - Electrical devices - Protection against
ignition of surrounding flammable gases h |
|
| FDIS 8849 - Electrically operated bilge pumps h |
FDIS sent to the TC 188 Secretariat 2002-01 |
| ISO 9097:1991 - Electric fans h |
|
| ISO 10133:2000 - Electrical systems - Extra-low-voltage
d. c. installations * |
ISO standard published 2000-12-01 |
| FDIS 10134 - Electrical devices - Lightning protection |
FDIS sent to the TC 188 Secretariat 2002-01. Exemption of
FDIS stage is allowed. Final text can be sent to ISO CS. To be discussed at the
TC 188 meeting E-mail sent to the convenor 2001-12-07 |
| ISO 13297:2000 - Electrical systems - Alternating current
installations * |
ISO standard published 2000-12-01 |
WG 11 Sea-cocks/through-hull
fittings
F. Hartz |
ISO 9093-1:1994 - Seacocks and through-hull fittings
- Part 1: Metallic * |
|
| FDIS 9093-2 - Ditto - Part 2: Non-metallic * |
FDIS is circulated for voting. Voting begins on 2002-06-13
and voting terminates on 2002-08-13. |
| FDIS 15083 - Bilge pumping system * |
FDIS sent to ISO CS 2002-03-07.
(Annex Z is sent 2002-04-26 and F-version 2002-05-07) |
WG 12 Fire
protection
F. Hartz |
DIS 9094-1.3 - Fire protection - Part 1: Craft with
a hull length of up to and including 15 m * |
FDIS is sent from ISO CS to CMC asking for information regarding
the CEN Consultant's assessment 2002-05-10 |
| DIS 9094-2 - Ditto - Part 2: Craft with a hull length
of over 15 m |
FDIS is sent from ISO CS to CMC asking for information regarding
the CEN Consultant's assessment 2002-05-10 |
WG 13 Operating symbols
S. Velander |
DIS 11192 - Graphical symbols * |
Registration numbers are awaited from ISO/TC 145/SC 3 |
WG 14 Personal
safety equipment
R. Popp;
Secr: H.-H. Lehnecke |
DIS 12401 - Deck safety harness and safety line - Safety
requirements and test methods (PrEN 1095) |
Exemption of FDIS stage is allowed. But all comments received
have been discussed at the WG 14 meeting. FDIS will be prepared at the next meeting |
DIS 12402-1 "PFDs - Lifejackets for seagoing ships
-Safety requirements"
DIS 12402-2 "PFDs - Lifejackets for extreme offshore conditions (level
275) - Safety requirements"
DIS 12402-3 "PFDs - Lifejackets for offshore conditions (level 100) - Safety
requirements"
DIS 12402-4 "PFDs - Lifejackets for inland/close to shore conditions (level
100) - Safety requirements"
DIS 12402-5 "PFDs - Buoyancy aids - Safety requirements"
DIS 12402-6 "Personal flotation devices (PFDs) - Special purpose lifejackets
and buoyancy aids - Safety requirements and additional test methods"
DIS 12402-7 "PFDs - Materials and components -Safety requirements and test
methods"
DIS 12402-8 "PFDs - Accessories - Safety requirements and test methods"
DIS 12402-9 "PFDs - Test methods"
DIS 12402-10 "PFDs - Selection and application of flotation devices and
other relevant devices" |
See the Report from the convenor ISO/TC 188 N 566 |
ISO 15027-1 - Immersion suits - Part 1: Constant wear
suits, requirements including safety
ISO 15027-2 - Ditto - Part 2: Abandonment suits
ISO 15027-3 - Part 3: Test methods |
ISO standards published 2002-03-15 |
WG 15 Liferafts
P.Barbleu |
DIS 9650-1- Inflatable liferafts - Part 1: General
requirements |
See the report from the convenor ISO/TC 188 N 567. It was
decided to re-instate DIS 9650-1 in the program of work. See Resolution 310. This
part will be divided into two parts. |
| CD 9650-2 - Inflatable liferafts - Part 2: Materials |
See the report from the convenor ISO/TC 188 N 567. It was
decided to re-instate DIS 9650-2 in the program of work. See Resolution 310. This
part will be Part 3 of the standard. |
WG 16 Gaseous fuel systems
R. Lambrecht |
ISO 10239:2000 - Liquefied petroleum gas (LPG) systems |
ISO standard published 2000-09-01 |
WG 17 Owner's manual
G. Dolto |
DIS 10240 - Owner's manual h |
Dis circulated for voting. Voting begins on 2002-03-21 and
voting terminates on 2002-08-21 |
