|
5.2.2 Location of NOx Monitoring Unit
.1 On-board Test at "IKOMASAN"
Figures 5.2.2.1 to 5.2.2.3 show location of NOx monitoring system for on-board test (test ship: IKOMASAN).
|
Figure 5.2.2.1
|
Setting of Transmitter onto Outlet of Economizer |
|
Figure 5.2.2.2.
|
Setting of Control Panel with Receiver |
Figure 5.2.2.3 Setting of Data-logger
The transmitter with probe and sensor is welded on the cover of the outlet of the economizer, in order to prevent the probe (screw type, T1/2) from falling by the vibration of the ship at sea. Figure 5.2.2.4 shows the transmitter attached on the cover.
|
Figure 5.2.2.4
|
Transmitter Attached to the Cover |
|
