Since the work of the Joint TC 127/SC 2/TC 108/SC 2 WG on the Revision of ISO 7096 had been finalised and the third edition ISO 7096:2000 "Earth-moving machinery - Laboratory evaluation of operator seat vibration" had been published, ISO/TC 108/SC 2 recommends to ISO/TC 127/SC 2 to disband the Joint WG.

　

ISO/TC 108/SC 2 decides to change the status of the approved work item AWI 16950 "Mechanical vibration and shock - Guidelines for the design and implementation of base isolation systems to attenuate ground vibration" and to register it as a stage "0" item (PWI). The status of this project will be reviewed at the next SC 2 meeting.

　

ISO/TC 108/SC 2 decides that upon receipt of the text as revised at the meeting of WG 1, a 1st CD 13373-2 will be circulated to SC 2 members for voting. Target date for receipt of the text by the secretariat is August 2002.

　

ISO/TC 108/SC 2 decides to change the work item AWI 20283 into a multi-part document with the following provisional parts :

Part 1 General...

Part 2 Mechanical vibration - Guide for the measurement, evaluation, and reporting of global structural vibration in merchant ships

Part 3 Mechanical vibration - Vibratory Acceleration measurements and acceptance criteria of shipboard equipment

Part 4 Mechanical Vibration - Guidelines for the Measurement and Evaluation of Ship Propulsion Machinery Vibration

Part 5 (future revision of ISO 6954:2001)

and to register parts 1, 2 and 4 as preliminary work items (PWI).

A first CD for part 3 will be circulated to SC 2 members for comments by end of November 2002.

A draft for part 1 is expected by end of November 2002 for circulation as new work item proposal (NP).

A draft for part 4 is expected by end of January 2003 for circulation as NP.

　

Having considered the result of voting given by the secretariat at the meeting (all countries voting positively except Norway) and the report of WG 3, ISO/TC 108/SC 2 decides that the text revised according to the members comments will be submitted to ISO/CS for circulation as DIS.

　

ISO/TC 108/SC 2 decides to delete WI 9629 from its programme.

　

SC 2 decides that a new work item proposal would be prepared to address "rail track geometry", that would make some use of ISO/DIS 9629, during August 2002.

　

ISO/TC 108/SC 2 encourages WG 7 to discuss without delay the comments to be expected on the first CD 14839-2 and to give first priority to the finalisation of the text for a second CD or for DIS circulation. The development of further parts should be given a second priority.

　

According to the result of voting on CD 14837-1 (doc 108/2 N 372) and the discussion of comments received, ISO/TC 108/SC 2 decides to submit the revised text to ISO/CS for DIS circulation.

　

Provided that the result of voting on NP Amendment to ISO 10326-1:1992 (doc 108/2 N 376) will be positive, ISO/TC 108/SC 2 agrees that the WI will be developed in CEN/TC 231 (WG 9) in parallel with ISO. The group should be open for experts nominated by SC 2 and SC 4 members.

　

ISO/TC 108/SC 2 decides to confirm the Croatian request to revive of the WI together with human assessment to establish confidence in the guidelines of ISO 6954. The common procedure for data collecting will be reviewed and adopted through the WI for establishing environmental guidelines according to new measuring procedures in ISO 6954.

　

Having considered the report of Joint WG 1, SC 2 decides to circulate the text for a 1st CD for the revision of ISO 7919-5 to SC 2 and through their secretariat to IEC/TC 4 members for comments.

　

SC 2 notes the request of the JWG to circulate a NP on the revision of ISO 10816-5 to members for approval if and when the revision of ISO 7919-5 has been accepted.

　

SC2 agrees to provide advance warning to ISO Central Secretariat that ISO 13373-2 will be circulated as a first Committee Draft. On receipt of the revised draft within three months SC2 will circulate ISO 13373-2 as a first Committee Draft for voting.

　

SC2 decides to inform SC2/JWG9 that SC2/WG1 requests that the draft ISO 10816-7 (vibration of pumps) should clearly indicate that close coupled pumps with integral drives shall be excluded from part 7 and dealt with under the existing ISO 10816-3.

　

SC2 decides that the first CD ISO 10816-7 (vibration of pumps) will be circulated to SC2, ISO/TC115 and IEC/TC2 for comment only.

　

In response to feedback from IEC/TC2, SC2 decides to draw to the attention of SC2/JWG9 resolution 2/2001 which was adopted at the SC2 meeting in Berlin in April 2001, i.e.

　

"ISO/TC108/SC2 requests WG9 (joint WG with ISO/TC115) to consider the request of IEC/TC2 to develop an evaluation procedure for vertical machines mounted on elastic foundation (doc. 108/2 N353) and to give an indication of the time scale for producing a proposal. In so doing WG9 is requested to express its opinion with regard to both the general case of in-situ vibration of motors coupled to pumps and the particular case of vertical motors mounted on pumps."

　

ISO/TC 108/SC 2 thanks Bently Nevada Corporation for providing SC 2 and its Working groups with excellent meeting facilities and appreciated leisure time activities in an impressive environment and especially Mr. Richard Thomas and Ms Donna Chizek for their assistance. SC 2 also thanks ANSI/ASA for assisting the secretariat in organising the meetings.