日本財団 図書館


添付資料 3
(拡大画面:40KB)
 
(拡大画面:46KB)
 
添付資料 4
 
ISO/TC108/SC2/WG2 Vibration of Ships
ISO/TC108/SC2/WG2 N225
Convenor Helge Christian Tesch e-mail hct@oss.dk
 
 
Minutes of meeting for
ISO/TC 108/SC 2/WG 2 meeting in Berlin 34 April 2001.
Agenda according to ISO/TC 108/SC 2/WG 2 N221
 
1) Opening of the meeting by acting convenor Alf H. Olsson
 
2) Roll call of participants
 
Name Country e-mail address
AlfH Olsson Sweden olsson@sekom.se
Svend Lindblom Sweden svend.lindblom@previa.se
Olle Brfelt Sweden olle@ipso-cc.se
Nenad Bobanac Croatia nenad.bobenac@zg.tel.hr
Richard Taddeo USA TaddeoRF@navsea.navy.mil
Arthur Kilcullen USA sigart@intrepid.net
Hiroaki Hirasawa Japan Hirioaki_Hirasawa@tsu.nkk.co.jp
Ivar Asmussen Germany asm@germanlloyd.org
Patrick Morel France patrick.morel@bureauveritas.com
Helge Christian Tesch Denmark hct@oss.dk
 
3) Nomination and election of a new convener for WG 2
Helge Tesch was elected as new convenor.
 
4) Approval of agenda for the meeting.
N221 was approved
 
5) Review of the minutes from the meeting in Odense 1999-05.06
No comments.
 
6) Activities for implementation of the new ISO 6954
Helge Tesch mentioned that at least 2 instrumentation makers has instrument that full fil the new broadband filter in ISO 6954.Helge was ask to include the names of the two companies and type of instrument in minute of meeting. The companies are:
 
Name and address
Type of instrument
Svantek Ltd. ul. Ks. Jana Sitnika 1/68
01-410 Warsaw, Poland
SVAN 912A + SV 06A
 
Brel & Kjr
type 2260 G + WB 1438
Sound & Vibration Measurement AS Skodsborgvej 307 DK-2850 Nrum
 
e-mail nordic@bk.dk
 
 
It was also decided that Helge Tesch should before next meeting produce a technical paper with comparison of old and new ISO 6954 with the same measured data.
 
7) Review of ISO 4867 and ISO 4868
It was decided that a new work item proposal (NP) should include what is in ISO 4867 and ISO 4868.
When the new standard are ready ISO 4867 and 4868 should be deleted.
 
The new work item proposal was circulated as ISO/TC 108/SC 2/WG 2 N 222. The paper was discussed including a written comments from Japan.
 
The title was changed to "Mechanical vibration and shock - Guidelines for the measurement, reporting and evaluation of structural vibration in ships"
 
Scope : "The International Standard establishes uniform procedures for acquiring, processing, evaluating and presenting shipboard vibration data for ships. It is applicable to both turbine and diesel-driven ships, with single or multiple shafts. Requirements for instrumentation, methods of measurement and processing of data are also defined. The data will be useful for design evaluation of a ship and diagnostics, and comparision with the vibration performance of other vessels."
 
It was suggested that Helge Tesch should be project leader and he should before next meeting modify N 222 for further discussion.
 
8) Review of US proposal (see attached "222-USNP.doc")
Mechanical vibration and shock- Guide for the measurement, evaluation, and reporting of global structural vibration in merchant ships.
This item was covered in agenda point 7.
 
9) 
Review of US proposal ( see attached "223-USST.doc") American National Standard Mechanical Vibration - Guidelines for the Measurement and Evaluation of Ship propulsion Machinery Vibration
This item was also covered in agenda point 7 and should be included in above mentioned new work item.
 
10) 
Review of the New SC 2 work item proposal (document 108/SC 2/ N 352) Mechanical vibration- Vibratory noise measuremets and acceptance criteria for shipboard equipment.
It was suggested that Richard Taddeo should be project leader within WG 2.
Richard Taddeo ask for expert to join this topic, all country at the meeting were interested and would come up with names on expert.
 
11) Next meeting.
Minden Nevada USA 6-10 may 2002.
 
12) Closure of meeting
The new convener thanks the old convener for his time in WG 2, and the host Dieter Hansen DIN for the arrangement.
 
Helge Tesch







日本財団図書館は、日本財団が運営しています。

  • 日本財団 THE NIPPON FOUNDATION