Information Sheet 9
General Information
Bunding
｡? bund is a low wall built to contain liquids. !t can be made of any impervious material, such as bricks or concrete.
｡? bund should be large enough to hold the contents of the largest container plus 10%. Bunded areas should be roofed to prevent rain from entering them and washing pollutants out or rusting the drums. Consult WorkCover when installing roofing over bunded areas. Guidelines are available from the EPA or from your local council.
｡?peed humps about 100 mm high across the entrance to the workshop can turn the whole workshop into a bunded area. If any spills do occur then they are contained within the work area and can be mopped up. This can be an acceptable alternative to building a specific bunded area, as long as you can show that no spills can escape. Use speed humps as bunds only if they are contained in a roofed area.
｡? ramp across the bund will allow easy placement and removal of containers.
｡?aint bunds yellow for safety
Environmental Management Systems and Plans
｡?n environmental management system can include an environmental management program or plan (EMP) for your business; a written environmental policy; a regular environmental review process; and a demonstrated commitment by management and staff to meet and maintain the standards set out in your plan.
