SPARTIA 75,115-dwt Panamax Bulk Carrier
SPARTIA was completed in July, 2000 as he hundredth Panamax bulker built by Hitachi Zosen Corp.
SPARTIA is also the fifth vessel of he Panamax Jumbo which is the fourth generation of the Hitachi Panamax.
Hitachi Panamax Jumbo is he largest class bulker of the Panamax type with a 75,000 ton deadweight and 90,000 m3 cargo and was developed based on Hitachi's abundant experience in order o satisfy a wide range of demands by various clients.
Features
1. Block coefficient was increased up to he ultimate level together with minimizing fore and aft end parts to realize maximum cargo deadweight / volume within limited dimensions.
2. In order o maintain he adequate propulsive performance even with such a full hull shape, theoretical analysis using CFD was fully utilized together with model tests which has contributed to he optimization of hull shape.
In addition to he above, he super stream duct (SSD), which is an energy saving device developed by Hitachi, is installed and contributes to cutting necessary power by 5 to 7%.
3. The areas of the hatchway are widened and maximized to enhance cargo loading and unloading efficiency.
4. Automation provision corresponding to unmanned engine room is included as standard.
5. MARPOL Annex VI is applied and NOx emission is lowered as a countermeasure for environment protection.
PRINCIPAL PARTICULARS
Length (o.a.) ... 225.00 m
Length (b.p.) ... 215.00 m
Breadth (mld.) ... 32.20 m
Depth (mld.) ... 19.15 m
Draft (mld.) ... 13.841 m
Gross tonnage ... 39,783
Deadweight ... 75,115 MT
Main engine ... Hitachi Zosen-Man B&W 6S60MC (MK6)
MCR ... 14,610 PS x 99.0 rpm
NOR1 ... 13,150 PS x 95.6 rpm
Speed (max. trial) ... 17.00 knots
(service) ... 15.00 knots
Complement ... 31
Classification ... LRS
Loading capacity (tank) ... F.W.: 326 m3
D.O.: 216 m3
W.B.T.: 34,430 m3
F.O.: 2,750 m3
(grain) ... 89,422.5 m3 (Hold capacity)
