Development of SMAW Coatings for Underwater Wet Welding at Specific Depth Ranges
Mark D. Rowe ─ Colorado School of Mines
Stephen Liu ─ Colorado School of Mines
Thomas J. Reynolds ─ Global Industries Ltd.
MAT-04 FATIGUE PERFORMANCE OF WELDED JOINTS
OMAE99/MAT-2001
Fatigue of Tendon Welds With Internal Defects
Jaime Buitrago ─ Exxon Production Research Company
Nick Zettlemoyer ─ Exxon Production Research Company
OMAE99/MAT-2003
Fatigue Design of Girth Welded Pipes and the Validity of Using Strips
Mamdouh M. Salama ─ Conocc Incorporated
OMAE99/MAT-2004
Fatigue Performance of Plate Attachments Welded by GTAW
William C. Mohr─ Edison Welding Institute
Randy Bowers ─ Edison Welding Institute
OMAE99/MAT-2449
Fatigue Strength Analysis of Hollow Section T-Joints With Circular Braces and Square Chords
Lichun Bian ─ University of Hong Kong
Stig Berge ─ Norwegian University of Science and Technology
OMAE99/MAT-2258
A Parametric Study on Stress Concentrations in Single-Sided Welds in Offshore Tubular Joints
Marcus M. K. Lee ─ University of Wales
Wayne Jones ─ UK Health & Safety Executive
MAT-05 COMPOSITES
OMAE99/MAT-2002
Key Issues in the Design of Deepwater Composite Risers
Mamdouh M. Salama ─ Conoco Incorporated
OMAE99/MAT-2359
Optimisation of Sandwich FRP Panels
A. Arriaga ─ University of Southampton
R. A. Shenoi ─ University of Southampton
OMAE99/MAT-2360
Long Term Cyclic Fatigue Strength Prediction Methodology for Fiber Composite Laminates Under Multiaxial Loading
Metin Karayaka ─ Aker Maritime, Inc.
Su Su Wang ─ University of Houston
OMAE99/MAT-2361
High Pressure Spoolable Composite Pipe
Per Arne Haug ─ NAT Compipe AS
Bent Asdal ─ NAT Compipe AS
OMAE99/MAT-2362
Ice Impact and Wear Resistance of Fiber-Reinforced Polymer Composite Sheet Piles
Piyush K. Dutta ─ U.S. Army Cold Regions Research and Engineering Laboratory
Devinder S. Sodhi ─ U.S. Army Cold Regions Research and Engineering Laboratory
OMAE99/MAT-2364
The Application of Composite Materials to Structural Fire Protection
Steve Scanio ─ American Bureau of Shipping (ABS)
OMAE99/MAT-2365
Regulatory Issues and Approval Procedures Regarding Fiberglass Pipe
Joie L. Folkers ─ Ameron International
MAT-06 STEEL SELECTION AND FRACTURE CONTROL
OMAE99/MAT-2130
Equivalent CTOD Concept for Fracture Toughness
Requirement of Materials for Steel Structures
Fumiyoshi Minami ─ Osaka University
Takanori Katou ─ Osaka University
Tetsuya Nakamura ─ Osaka University
Kazushige Arimochi─ Sumitomo Metal Industries Ltd.
OMAE99/MAT-2071
Literature Review of the Fracture Properties of Grade A Ship Plate
A. C. Bannister ─ British Steel
A. Stacey ─ UK Health & Safety Executive
OMAE99/MAT-2419
A Study on Local Brittle Zone Phenomena in Cryogenic Steel Weldment
Jae-il Jang ─ Seoul National University
Woo-sik Kim ─ Korea Gas Corporation
Young-chul Yang ─ Korea Gas Corporation
Dongil Kwon─ Seoul National University
