3　Means for retention and disposal of oil residues (sludge) (regulation 17) and bilge water holding tank(s)^*

　

3.1　The ship is provided with oil residue (sludge) tanks as follows:

　

　

3.2　Means for the disposal of residues in addition to the provisions of sludge tanks:

　

3.2.1　Incinerator for oil residues, capacity.........I/h　□

　

3.2.2　Auxiliary boiler suitable for burning oil residues　□

　

3.2.3　Tank for mixing oil residues with fuel oil, capacity .........m³　□

　

3.2.4　Other acceptable means:.........　□

　

3.3　The ship is fitted with holding tank(s) for the retention on board of oily bilge water as follows:

　

　

2.3　The following is added after existing paragraph 5.7.2:

　

"5.7.3　The ship is required to be constructed according to, and complies with the requirements of regulation 25A.　□

　

^*Bilge water holding tank(s) are not required by the Convention, entries in the table under paragraph 3.3 are voluntary.

前ページ　　　目次へ　　　次ページ