3.3　The ship is fitted with holding tank(s) for the retention on board of oily bilge water as follows:

　

　

2　Amendments to the Supplement to the IOPP Certificate (Form B)

　

2.1　The following is added after the existing paragraph 1.11.2:

　

"1.11.2bis　Product carrier not carrying fuel oil or heavy diesel oil as referred to in regulation 13G(2bis), or lubricating oil　□ "

　

2.2　The existing paragraphs 2.4 to 3.2 is replaced by the following:

　

"2.4　Approval Standards ^*:

　

2.4.1　The separating/filtering equipment:

　

.1　has been approved in accordance with resolution A.393(X)　□

　

.2　has been approved in accordance with resolution MEPC.60.(33)　□

　

.3　has been approved in accordance with resolution A.233(VII)

　

.4　has been approved in accordance with national standards not based upon resolution A.393(X) or A.233(VII)　□

　

.5　has not been approved　□

　

2.4.2　The process unit has been approved in accordance with resolution A.444(XI)

　

^*Refer to Recommendation on international performance and test specifications of oily-water separating equipment and oil content meters adopted by the Organization on 14 November 1977 by resolution A.393(X), which superseded resolution A.233(VII); see IMO sales publication IMO-608E. Further reference is made to the Guidelines and specifications for pollution prevention equipment for machinery space bilges adopted by the Marine Environment Protection Committee of the Organization by resolution MEPC.60(33), which, effective on 6 July 1993, superseded resolutions A.393(X) and A.444(XI); see IMO sales publication IMO-646E.

前ページ　　　目次へ　　　次ページ