IACS Req.1998
W25(May,1998) Aluminium Alloys for Hull Construction and Marine Structure (一部抜粋)
3. ALUMINIUM ALLOYS AND THEIR TEMPER CONDITIONS
3.1 Rolled products(sheets,strips and plates)
The following aluminium alloys are covered by these Requirements:
5083
5086
5754
with the hereunder temper conditions:
O/H111/H112
H116
H32/H321
3.2 Extruded products(sections,shapes,bars and closed profiles)
The following aluminium alloys are covered by these Requirements:
5083
5086
with the hereunder temper conditions:
O/H111/H112,
and 6005A
6061
6082
with the hereunder temper conditions:
T5 or T6.
Note: The alloy grades 6005A, 6061 of the 6000 series should not be used in direct contact with sea water unless protected by anodes and/or paint system.