NAV 44/7/8
Appendix A
10.5.1 Para applies to RCDS.
10.5.2 It should be possible to display a
sea area that does not have the ship on the display (e.g. for
look ahead, route planning), while route monitoring. If this
is done on the display used for route monitoring, the
automatic route monitoring functions in 10.4.6 and 10.4.7
should be continuous. It should be possible to retrn to the
route monitoring display covering own ship's position
immediately by single operator action.
10.5.3-4 Paras do not apply to RCDS.
10.5.5-6 Paras apply to RCDS.
10.5.7 RCDS should provide an alarm when
the input from the positioning-fixing system is lost. RCDS
should also repeat, but only as an indication, any alarm or
indications passed to it from a position-fixing system.
10.5.8 Para does apply to RCDS.
10.5.9 The RCDS should only accept data
referenced to the WGS-84 or PE-90 geodetic datum. RCDS should
give an alarm if the positional data is not referenced to one
of these datums.
10.5.10-13 Paras apply to RCDS.
10.5.14 RCDS should allow the user to
manually align the SRNC with positional data. This can be
necessary, for example, to compensate for local charting
errors.
10.5.15 It should be possible to activate
an automatic alarm when the ship crosses a point, line, or is
within the boundary of a mariner-entered feature within a
specified time or distance.
10.6 Voyage recording
10.6.1-4 All paras apply to RCDS.
11. ACCURACY
11.1-11.2 All paras apply to RCDS.
12. CONNECTIONS WITH OTHER EQUIPMENT
12.1-12.2 All paras apply to RCDS.
I:/NAV/44/7-8.WPD
