3.6-3.7 Paras do not apply to RCDS.
3.8-3.10 Paras apply to RCDS.
3.11 There should always be an indication if the ECDIS equipment is operating in the RCDS mode.
4 PROVISION AND UPDATING OF CHART INFORMATION
4.1 The RNC used in RCDS should be the latest edition of that originated by, or distributed on the authority of, a government authorized hydrographic office and conform to IHO standards. RNCs not on WGS-84 or PE-90 should carry recta-data (i.e., additional data) to allow geo-referenced positional data to be displayed in the correct relationship to SRNC data.
4.2 The contents of the SRNC should be adequate and up-to-date for that part of the intended voyage not covered by ENC.
4.3-4.8 All paras apply to RCDS.
5 SCALE
This section applies to RCDS.
6 DISPLAY OF OTHER NAVIGATIONAL INFORMATION
6.1-6.3 All paras apply to RCDS.
7 DISPLAY MODE AND GENERATION OF THE NEIGHBOURING AREA
7.1 It should always be possible to display the RNC in "chart-up" orientation. Other orientations are permitted.
7.2-7.4 All paras apply to RCDS.
8 COLOURS AND SYMBOLS
8.1 IHO recommended colours and symbols should be used to represent SRNC information.
8.2 Para applies to RCDS.
8.3 Para does not apply to RCDS.
8.4 Para applies to RCDS.
