ISO/TC8/SC6/WG8 釜山会議報告書
（拡大画面：12KB）
目次
ISO/TC 8/SC 6/WG 8 国際標準化機構／船舶及び海洋技術専門委員会／航海分科会／THD作業委員会／釜山会議報告書
SO/TC 8/SC 6/WG 8 釜山会議資料目録
AGENDA
The background of the THD
Requirements for the THD
Foreword
COMMITTEE DRAFT
1 Scope
2 Normative references
3 Terms and definitions
4 Performance requirements
4.1 Functionality
4.2 Information
4.3 Fore-and-aft mark
4.4 Heading information
4.5 Electrical wiring
4.6 Non-magnetic housing
4.7 Alarm signal
5 Accuracy of heading
5.1 General
5.2 Accuracy of transmission data
5.3 Static error (settle point error)
5.4 Dynamic error
5.5 Follow-up error
5.6 Settling time requirements to the directional system
5.7 Correcting the magnetic heading by magnetic variations
5.8 Adjusting of magnetic deviations and heeling error
5.8.1 Check by bearings
5.8.2 Check by magnetic fields
5.9 Means of adjusting the deviation by vertical soft iron of the ship
5.10 Protection of correcting devices
6 Type tests
6.1 General
6.2 Transmission error tests
6.3 Fore-and-aft mark tests
6.4 Heading information tests
6.5 Static error test
6.5.1 In a magnetic compass type THD
6.5.2 In an electromagnetic compass type THD
6.6 Follow-up error test
6.7 Settling time test
6.8 Tests of correcting the magnetic heading by magnetic variations
6.9 Tests of adjusting magnetic deviations
6.10 Tests of the means of adjusting the deviation by vertical soft iron
6.11 Dynamic accuracy
6.12 Update rate test
7 Marking and identification check
Annex A (informative) Equivalent requirements in ISO 22090-2 and IMO Resolution MSC.116(73)
Foreword
COMMITTEE DRAFT
1 Scope
2 Normative references
3 Terms and definitions
4 Performance and requirements
4.1 Functionality
4.2 Continuous operation
4.3 Presentation of information
4.4 Heading output alignment
4.5 Compensation for brief GNSS signal interruption
4.6 Settling time
4.7 Heading information update
4.8 Alarm signal
4.9 Interface
5 Accuracy
5.1 Accuracy of transmission data
5.2 Static error
5.3 Dynamic error
5.4 Follow-up error
6 Type tests
6.1 General
6.2 Organization of test conditions
6.2.1 Testing under ambient test conditions
6.2.2 Static test site
6.2.3 Dynamic test site
6.3 Settling time test
6.4 Static error test
6.5 Dynamic test
6.6 Follow-up error test
6.7 Back up test
6.8 Environmental test condition for normal operation
6.8.1 Functional test during temperature(dry heat) test of the transmitting part
6.8.2 Functional test during vibration test of the transmitting part
6.9 Electromagnetic compatibility test
7 Marking and identification
Annex A (informative)
Equivalent requirements in ISO 22090-3 and Resolution
Equivalent requirements in ISO 22090-3 and IEC 61108-1
Experts of SC 6 WG 8 (THDs) and Drafting group member of the THDs
Draft resolutions of the ISO/TC 8/SC 6/WG 8 meeting in Busan,2002-10-21
Explanatory report ISO/DIS 22090−2.2
Template for comments and secretariat observations ISO/CD 22090−2.2
Explanatory report ISO/DIS 22090−3
Template for comments and secretariat observations ISO/CD 22090−3
参考
※ 成果物の著作権に関するご注意
